Front brake discs r r

Operation 3310A50 · FRONT DISC BRAKES

Removing

Place the car on a lift.

- 4450B12 front or rear wheels (two) - r+r

1. Release the rubber retainer (1a) on the brake pipe from its seating (1b) on the shock absorber.

2. Remove the spring fixing the brake caliper to the bracket.

3. Unscrew the bolts (3a) and move the front brake caliper assembly (3b) aside.

- 3310A57 front brake calliper bracket - r r.

1. Undo the two fixing pins.

2. Remove the front brake discs.

Refitting

Position the brake discs and fix them with the fixing pins.

- 3310A57 front brake calliper bracket - r r.

Fit the front brake calipers to the discs.

Fix the brake calipers, tightening the two rear fixing bolts.

Whenever the brake calipers are replaced, replace the retaining bolts with new bolts.

Fit the caliper fixing spring in the correct position.

Secure the brake pipe to the seat on the shock absorber.

When fitting the hose, check that the retaining block is correctly positioned to prevent the pipe coming into contact with the wheel arches or mechanical vehicle parts under all wheel travel or steering conditions.

- 4450B12 front or rear wheels (two) - r+r.

Remove the car from the lift.