Alternator drive belt - adjust tension
- Make
- Fiat
- Model
- Doblò Factory Service Manual
- Year
- 2000–2010
- Section
- Engine component miscellaneous drives › Alternator drive belt - adjust tension
EngineAlternator drive belt - adjust tension
Alternator drive belt - adjust tension
1. Use tool (1a) and check that the tension of new belt (1a) is within the recommended values
| Name | Country | |
|---|---|---|
| 1a | Torque wrench | 1.895.762.000 |
| Measurement | Value | ||
|---|---|---|---|
| Alternator belt tensioning (daNm) | 48 - 60 | ||
| New belt (-) | |||
| Measurement | Value | ||
|---|---|---|---|
| Alternator belt tensioning (daNm) | 30 - 41 | ||
| Used belt (-) | |||
If the value measured is not within the recommended limits, repeat the tensionining operation, loosening the alternator fastenings.
Rotate the alternator and correct the belt tension until it is within the permissible limits.
When the operation is completed, tighten the lower alternator fixing bolt (hinge).
| Fastening | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| Bolt | ALTERNATOR ASSEMBLY | M12 | 8 |
Tighten the upper alternator fixing bolt (slotted area) to torque.
| Fastening | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| Bolt | ALTERNATOR ASSEMBLY | M10 | 5 |
Parts & tools for this job For 2000 Fiat Doblò
- TOOLBattery testerSearch: car battery tester
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBattery terminal cleanerSearch: battery terminal cleaner
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.