Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Doblò Factory Service Manual (2000-2010)08 · Engine
08 · Engine

Turbocharger bracket - r r

Make
Fiat
Model
Doblò Factory Service Manual
Year
2000–2010
Section
Engine supercharging system › Turbocharger bracket - r r
EngineTurbocharger bracket - r r

Turbocharger bracket - r r

Operation 1064A30 · TURBOCHARGER ASSEMBLY

1.3 JTD 16V, 1.9 JTD 8V

Removing

Position the vehicle on the ramp.

Proceed with the removal - 7055B54 under-engine guard - r r.

1. Undo the nuts (1a) (1b) and remove the turbocharger bracket (1c).

Turbocharger bracket - r r

Refitting

Place the turbocharger mounting bracket back in its housing and secure it using the bolts.

Proceed with the refitting - 7055B54 under-engine guard - r r.

Position the vehicle on the ramp.

Parts & tools for this job For 2000 Fiat Doblò

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.