Catalytic converter rear gasket - r r
- Make
- Fiat
- Model
- Doblò Factory Service Manual
- Year
- 2000–2010
- Section
- Exhaust pipes and silencers › Catalytic converter rear gasket - r r
Catalytic converter rear gasket - r r
Removing
Place the car on a ramp.
Op. 7055B54 PROTECTION/GUARD UNDER ENGINE - R.R.
1. Undo the fixing nuts (1a) and disconnect the exhaust pipe (1b) from the manifold/catalytic converter (1c).
2. Remove the gasket.
Refitting
Fit a new gasket.
Connect the intermediate exhaust pipe to the manifold/catalytic covnerter and tighten the fixing nuts to torque.
| Fastening | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| Nut | CATALYTIC CONVERTER (ONE) | M8 | (Flange connecting intermediate exhaust. pipe) 3 |
Op. 7055B54 PROTECTION/GUARD UNDER ENGINE - R.R.
Remove the vehicle from the ramp.
Removing
Place the car on a lift.
1. Undo retaining nuts (1a) and detach exhaust pipe (1b) from catalytic converter (1c).
2. Remove the gasket.
Refitting
Fit a new gasket.
Connect the intermediate exhaust pipe to the catalytic converter and tighten the retaining nuts to torque.
| Fastening | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| Nut | INTERMEDIATE EXHAUST SILENCER | M8 | (Flange joint to catalytic converter) 3 |
Remove the vehicle from the ramp.
Parts & tools for this job For 2000 Fiat Doblò
- PARTExhaust gasketSearch: Fiat Doblò 2000 exhaust gasket
- TOOLPenetrating oilSearch: penetrating oil
- TOOLOBD2 scannerSearch: OBD2 scanner
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.