Gear control hardening
- Make
- Fiat
- Model
- Doblò Factory Service Manual
- Year
- 2000–2010
- Section
- Gear shift › Gear control hardening
‹ Prev The engine starts up and cuts out after a few secondsNext › Gear engagement or release difficult
Fault diagnosisGear control hardening
GEAR CONTROL HARDENING
Smooth gear engagement without grating is difficult in all conditions.
| Results of the tests | ||||
| 0 | PRELIMINARY CHECKS | All OK | Problems met | Operation |
|---|---|---|---|---|
| Check lubrication of gear control cable and gear selector fastenings | Continue to Step 1 | Lubrication incorrect | Lubricate correctly | |
| 1 | CHECK ON FIXING OF GEARBOX CONTROL CABLES | All OK | Problems met | Operation |
| Check the fixings of the gearbox control cables: they should not be incorrectly fixed | Continue to Step 2 | Cable not fitted correctly | Restore the correct fixing of the control cables Op. 2125C30 | |
| 2 | CHECK ON GEARBOX CONTROL CABLES | All OK | Problems met | Operation |
Check gearbox control cables:
| Continue to Step 3 | Ball joints worn Worn cables | Replace the control cables Op. 2125C30 | |
| 3 | CHECK ON GEAR LEVER BALL | All OK | Problems met | Operation |
| Check the gear lever ball joint: it should not be worn | Continue to Step 4 | Ball worn | Replace the gear lever Op. 2125C16 | |
| 4 | CHECK ON CORRECT OPERATION | All OK | Problems met | Operation |
| Check that the fault is no longer present | Fault persists | Search for the fault starting from another symptom' | ||
‹ Prev The engine starts up and cuts out after a few secondsNext › Gear engagement or release difficult
Parts & tools for this job For 2000 Fiat Doblò
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Fiat Doblò
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.