Electric front windows / not working
- Make
- Fiat
- Model
- Doblò Factory Service Manual
- Year
- 2000–2010
- Section
- Window opening mechanism › Electric front windows / not working
‹ Prev Heater recirculation not workingNext › Electric front windows / not working in automatic mode
Fault diagnosisElectric front windows / not working
ELECTRIC FRONT WINDOWS / NOT WORKING
With the ignition key in the ON position, when the buttons in the control panel are operated the front electric windows do not work.
| Results of the tests | ||||
| 1 | SWITCH SUPPLY CHECK | All OK | Problems met | Operation |
|---|---|---|---|---|
Check, in order:
| Continue to Step 2 | Component defective | Replace the component (if a fuse is involved, search for the cause of the problem) | |
| Connections not correct | Restore connections | |||
| 2 | RELAY CHECK | All OK | Problems met | Operation |
Check, in order:
| Continue to Step 3 | Component defective | Replace the component (if a fuse is involved, search for the cause of the problem) | |
| Connections not correct | Restore connections | |||
| 3 | CHECK ON BODY COMPUTER | All OK | Problems met | Operation |
| Check that the Body Computer sends the signal to the relay. | Continue to Step 4 | No signal | Replace the Body Computer Op. 5505A32 | |
| 4 | FUSE CHECK | All OK | Problems met | Operation |
Check, in order:
| Continue to Step 5 | Component defective | Replace the component (if a fuse is involved, search for the cause of the problem) | |
| Fuse control box defective | Replace the fuse box Op. 5505A10 | |||
| Connections not correct | Restore connections | |||
| 5 | SWITCH EARTH CHECK | All OK | Problems met | Operation |
| Check the condition of the earth lead for the switches in the control panel See E3050 ELECTRIC FRONT WINDOWS | Continue to Step 6 | Connections not correct | Restore connections | |
| 6 | MOTOR SUPPLY CHECK | All OK | Problems met | Operation |
| Check the condition of the cable between the switches in the control panel and the electric window motors See E3050 ELECTRIC FRONT WINDOWS | Continue to Step 7 | Connections not correct | Restore connections | |
| 7 | SWITCH CHECK | All OK | Problems met | Operation |
| Check the operation of the switches in the control panel See Test 7005MA | Continue to Step 8 | Switches not working | Replace switches Op. 5505A24 | |
| 8 | ELECTRIC WINDOW MOTORS CHECK | All OK | Problems met | Operation |
| Check the operation of the electric windows motors: check the continuity of the induction winding for each motor. | Continue to Step 9 | Winding open circuit | Replace the motor Op. 7005M21 | |
| 9 | CHECK ON CORRECT OPERATION | All OK | Problems met | Operation |
| Check that the fault is no longer present | Fault persists | Search for the fault starting from another symptom' | ||
‹ Prev Heater recirculation not workingNext › Electric front windows / not working in automatic mode
Parts & tools for this job For 2000 Fiat Doblò
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Fiat touch up paint
- PARTPanel clip assortmentSearch: Fiat panel clips assortment
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.