Cap of one wheel - r+r

Operation 4450B80 · Wheels and components

Removing

Position the vehicle on a lift.

Undo the fixing bolts and remove the wheel, complete with hub cap.

Refitting

1. Fit the wheel and fit the first bolt (1a) in the opening closest to the inflation valve (1b).

2. Fit the hub cover, ensuring that the symbol (2a) on the rear of the cover coincides with the inflation valve so that the valve protrudes through the opening (2b).

3. Fit the remaining bolts without tightening them fully.

Lower the vehicle so that the wheels rest on the ground.

Tighten the steel rimmed wheel bolts to the recomended torque.

Remove the vehicle from the lift.