1080 exhaust emission control system
- Make
- Fiat
- Model
- Doblò Factory Service Manual
- Year
- 2000–2010
- Section
- 10 engine › 1080 exhaust emission control system
Tightening torques1080 exhaust emission control system
1080 EXHAUST EMISSION CONTROL SYSTEM
| Component | Fastening | Ø | Value (daNm) | Validity |
|---|---|---|---|---|
| CATALYTIC CONVERTER (ONE) | Bolt | M8 | (Turbocharger side) 2.3 ÷ 2.8 | 1.3 JTD |
| CONVERTER FRONT LAMDBA SENSOR | Lambda probe | M8 x 1.5 | 4.5 | 1.2 8v |
| CONVERTER REAR LAMBDA SENSOR | M18 x 1.5 | (Manifold side) 4,5 | 1.6 16v | |
| E.G.R EXHAUST GAS HEAT EXCHANGER. | Bolt | M8 | (Cylinder head side) 2.0 ÷ 2.4 | 1.3 JTD |
| E.G.R EXHAUST GAS HEAT EXCHANGER. | Bolt | M8 | (Cylinder head side) 2.0 ÷ 2.4 | 1.3 JTD |
| EGR VALVE PIPE | Bolt | M8 | (EGR valve) 2.5 | 1.9 DIESEL |
| EGR VALVE PIPE | Bolt | M8 | 2.5 | 1.9 DIESEL |
| ENGINE OIL COLLECTION MANIFOLD | Bolt | M6 | (Engine crankcase side) 0.8 ÷ 1.0 | 1.3 JTD |
| ENGINE THERMOSTAT | Bolt | M8 | (Cylinder head side) 2.3 ÷ 2.8 | 1.9 JTD |
| ENGINE THERMOSTAT | Bolt | M8 | (Cylinder head side) 2.3 ÷ 2.8 | 1.9 JTD |
| ENGINE THERMOSTAT | Pin | M8 | (Cylinder head side) 2.3 ÷ 2.8 | 1.9 JTD |
| ENGINE THERMOSTAT | Pin | M8 | (Cylinder head side) 2.3 ÷ 2.8 | 1.9 JTD |
| FUEL VAPOUR ACTIVE CARBON TRAP FILTER | Nut | M6 | 0.85 | 1.2 8v |
| FUEL VAPOUR ACTIVE CARBON TRAP FILTER | Nut | M6 | 0.9 | 1.6 16v |
| PIPE TO EGR VALVE | Bolt | M8 | 2.5 | 1.9 DIESEL |
| RIGHT LAMBDA SENSOR | M8 x 1.5 | 4.5 | 1.2 8v |
Parts & tools for this job For 2000 Fiat Doblò
- PARTExhaust gasketSearch: Fiat Doblò 2000 exhaust gasket
- TOOLPenetrating oilSearch: penetrating oil
- TOOLOBD2 scannerSearch: OBD2 scanner
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.