2110 manual gearbox and differential
- Make
- Fiat
- Model
- Doblò Factory Service Manual
- Year
- 2000–2010
- Section
- 21 gearbox › 2110 manual gearbox and differential
Tightening torques2110 manual gearbox and differential
2110 MANUAL GEARBOX AND DIFFERENTIAL
| Component | Fastening | Ø | Value (daNm) | Validity |
|---|---|---|---|---|
| DIFF CROWN WHEEL | Bolt | M11 | 13 | |
| GEAR CASING PADS | Drain plug | M22 x 1.25 | (Differential side) 3.6 | 1.3 JTD |
| GEAR CASING PADS | Drain plug | M22 | (Differential side) 3.7 ÷ 5.5 | 1.3 JTD |
| GEAR CASING PADS | Plug | M22 x 1.5 | 3.6 | 1.3 JTD |
| GEAR CASING PADS | Tapered plug | M22 x 1.5 | 3.6 | |
| GEAR ENGAGMENT SELECTOR LEVER | Bolt | M8 | 1.5 | |
| GEAR SHAFTS | Ring nut | M20 | 11.8 | |
| GEARBOX GEAR CASING | Bolt | M8 | (Bellhousing support side) 2.3 ÷ 2.8 | 1.3 JTD |
| GEARBOX GEAR CASING | Bolt | M8 | 2.5 | |
| GEARBOX INTERNAL CONTROLS | Bolt | M6 | 1.8 | |
| GEARBOX INTERNAL CONTROLS | Bolt | M6 | 10 | |
| GEARBOX REAR COVER SPACER | Bolt | M8 | 2.5 | |
| GEARBOX REAR COVER | Bolt | M8 | 2.5 | |
| GEARBOX/ENGINE COUPLING BRACKET | Bolt | M12 x 1.25 | (Bracket to gearbox) 8 | 1.2 8v |
| GEARBOX/ENGINE COUPLING BRACKET | Bolt | M12 x 1.25 | 8 | 1.2 8v |
| GEARBOX/ENGINE COUPLING BRACKET | Bolt | M8 | (Lower engine crankcase side) 2.7 ÷ 3.3 | 1.3 JTD |
| MANUAL GEARBOX | Bolt | M10 | (Engine oil sump side) 5.0 ÷ 6.0 | 1.9 JTD |
| MANUAL GEARBOX | Bolt | M12 | (Crankcase side) 7.2 ÷ 8.8 | 1.9 JTD |
| MANUAL GEARBOX | Nut | M12 | (Crankcase side) 7.2 ÷ 8.8 | 1.9 JTD |
| MANUAL GEARBOX | Nut | M12 x 1.25 | 8 | 1.2 8v |
| MANUAL GEARBOX | Bolt | M12 x 1.25 | (below gearbox) 8 | 1.2 8v 1.6 16v 1.9 DIESEL |
| MANUAL GEARBOX | Bolt | M12 x 1.25 | (upper gearbox) 8 | 1.2 8v 1.6 16v 1.9 DIESEL |
| MANUAL GEARBOX | Nut | M12 x 1.25 | (below gearbox) 8 | 1.2 8v 1.6 16v 1.9 DIESEL |
| MANUAL GEARBOX | Bolt | M12 x 1.25 | (Lower) 8 | 1.2 8v 1.9 DIESEL |
| MANUAL GEARBOX | Bolt | M12 x 1.25 | (Upper) 8 | 1.2 8v 1.9 DIESEL |
| MANUAL GEARBOX | Bolt | M10 | (Gearbox/engine bracket side) 5.0 ÷ 6.1 | 1.3 JTD |
| MANUAL GEARBOX | Bolt | M12 | (Crankcase side) 7.2 ÷ 8.8 | 1.3 JTD |
| MANUAL GEARBOX | Nut | M12 | (Crankcase side) 7.2 ÷ 8.8 | 1.3 JTD |
| MANUAL GEARBOX | Bolt | M10 x 1.25 | (Join with oil sump) 5.5 | 1.9 DIESEL |
| MANUAL GEARBOX | Bolt | M10 x 1.25 | (Join with oil sump) 5 | 1.9 DIESEL |
| REVERSE IDLER | Bolt | M7 | 3.4 | |
| REVERSE IDLER | Bolt | M7 | 3.4 | |
| STARTER MOTOR | Bolt | M8 | 2.7 | 1.2 8v |
Parts & tools for this job For 2000 Fiat Doblò
- PARTClutch kitSearch: Fiat Doblò 2000 clutch kit
- TOOLClutch alignment toolSearch: clutch alignment tool
- FLUIDGear oilSearch: Fiat Doblò manual gearbox oil
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.