4410 front suspension
- Make
- Fiat
- Model
- Doblò Factory Service Manual
- Year
- 2000–2010
- Section
- 44 suspension and wheels › 4410 front suspension
Tightening torques4410 front suspension
4410 FRONT SUSPENSION
| Component | Fastening | Ø | Value (daNm) | Validity |
|---|---|---|---|---|
| COIL SPRING SUPPORT ON FRONT DAMPER | Bolt | M8 | (on suspension turret) 3.2 | |
| FRONT ANTI-ROLL BAR | Bolt | M10 x 1.25 | (rear) 7 | |
| FRONT ANTI-ROLL BAR | Bolt | M8 | (on track control arm) 2.8 | |
| FRONT ANTI-ROLL BAR | Nut | M6 | (rear) 0.8 | |
| FRONT DAMPER BOTTOM ATTACHMENT | Nut | M12 x 1.25 | (on pillar) 12 | |
| FRONT DAMPER | Nut | M10 x 1.25 | (Steering knuckle side) 12 | 1.2 8v |
| FRONT DAMPER | Nut | M12 x 1.25 | (Shock absorber side) 12 | 1.6 16v |
| FRONT DAMPER | Nut | M12 x 1.25 | 8.5 | |
| FRONT SUSPENSION LOWER LEVER BALL JOINT | Nut | (on track control arm) 2.4 | ||
| FRONT SUSPENSION LOWER LEVER BALL JOINT | Nut | M10 x 1.25 | 6 | |
| FRONT SUSPENSION LOWER LEVER BALL JOINT | Nut | M12 x 1.25 | (on pillar) 6 | |
| FRONT SUSPENSION LOWER LEVER | Bolt | M12 x 1.25 | (rear) 12.5 | |
| FRONT SUSPENSION LOWER LEVER | Bolt | M6 | (rear) 0.8 | |
| FRONT SUSPENSION LOWER LEVER | Nut | M12 x 1.25 | (front) 12.5 |
Parts & tools for this job For 2000 Fiat Doblò
- TOOLCoil spring compressorSearch: coil spring compressor
- TOOLBall joint separatorSearch: ball joint separator
- PARTFront shock absorbersSearch: Fiat Doblò 2000 front shock absorbers
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.