3. Refitting

Figure : B1BPRWXD

Remove the bolts (6).

Remove the chisel.

Move the power steering pump and the centring device (7) away from the engine.

Remove the coolant pump.

3. Refitting

CAUTION : Adhere to the tightening torques.

Refit the coolant pump using a new seal.

Position the coolant pump on the power steering pump.

Couple the coupling (3) by turning the power steering pump shaft (4) clockwise.

Refit the bolts (5).

Position the power steering pump and the centring device (7) on the engine.

Refit the bolts (6).

Block rotation of the coupling (3).

Tighten the coupling (3) by turning the power steering pump shaft (4) clockwise.

Reclip the pipe (at "a").

Refit :

• The hoses (1) and (2)
• The auxiliary equipment drive belt (according to equipment)
• The right-hand protector under the engine
• The protective panel under the engine

CAUTION : Perform the operations to be carried out following reconnection of the battery.

Reconnect the battery negative terminal.