4. Refitting

Figure : B1HG3HMD Remove the nuts (7). Remove the engine management ECU (6) from its mounting (5).

4. Refitting

Fit :

• The engine management ECU (6) on its support (5)
• The nuts (7)

Reposition the engine ECU assembly (6) and its mounting (5). Reconnect the connectors of the engine management ECU (6) (at "h", "j", "k"). Clip the locking clips on the connectors of the engine ECU (6) (at "h", "j", "k"). Position the engine harness (4) (at "g").

5. Refitting (continued)

Fit :

• The cover (2) of the engine management ECU unit (6)
• The nuts (3)

Retighten the nut (1).

CAUTION : Perform the operations to be carried out following reconnection of the battery.

Connect the battery.

6. Operations to be carried out : After replacing the engine management ECU

CAUTION : Systematically perform the operations below after replacing an engine ECU (6).