2. Refitting (page 2 of 2)
- Make
- Fiat
- Model
- Ducato Mk3 (250) Factory Service Manual
- Year
- 2006–2017
- Section
- Brake servo: removing - refitting
02 Brakes - 3.0 HDi2. Refitting · page 2 of 2
Fit a new seal (5).
- Figure : B3FP7MVD
Grease and position the ball-joint cover (6).
Refit the brake servo.
Couple the retaining clip (4).
Refit :
- The nuts (3)
- The stop lamp connector
- The master-cylinder
Couple up :
- The vacuum pipe (2) (according to equipment)
- The vacuum pipe (2) and vacuum sensor assembly (according to equipment)
Refit lower trim panel (1).
ESSENTIAL : Fill and bleed the braking system.
Parts & tools for this job For 2006 Fiat Ducato
- PARTBrake padsSearch: Fiat Ducato 2006 brake pads
- TOOLBrake bleeder kitSearch: one man brake bleeder kit
- FLUIDBrake fluidSearch: brake fluid
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.