1. Tooling

Make

Fiat

Model

Ducato Mk3 (250) Factory Service Manual

Year

2006–2017

Section

Front brake pads: removing - refitting › 1. Tooling

02 Brakes - 3.0 HDi1. Tooling

ESSENTIAL : Observe the safety and cleanliness recommendations .

1. Tooling

Pliers FACOM D60A.

2. Removing

Untighten the wheel screws (front).
Lift and support the front of the vehicle.
Remove the front wheels.

Figure : B3FP7JKD

Disconnect the electrical harness (1) (Brake pads worn warning light) (at "a").

Remove :

• The rubber gaiter (at "b")
• The pillar screw (2)

Figure : B3FP7JLD

Push back the stud ( as "c"); By means of a screwdriver.

02 Brakes