Refit : (page 2 of 6)
- Make
- Fiat
- Model
- Ducato Mk3 (250) Factory Service Manual
- Year
- 2006–2017
- Section
- Engine: stripping-assembling
03 Engine - 3.0 HDiRefit : · page 2 of 6
![A diagram showing hands using a yellow tool [5] to hold the crankshaft pulley (11) while tightening a bolt (23).](/fiat/ducato-2006-2017/assets/page_536_fig01.png)
Figure : B1EM008D
Refit :
- The crankshaft pulley (11)
- The (23) bolt (Screw in without tightening)
Immobilise the pulley (11); Using tool [5].
Tighten the bolt (23) to 35 ± 3,5 daN.m.
Parts & tools for this job For 2006 Fiat Ducato
- PARTEngine gasket setSearch: Fiat Ducato 2006 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.