1. Tooling

ESSENTIAL : Observe the safety and cleanliness recommendations.

CAUTION : Depending on the vehicle, use the method that is most appropriate.

1. Tooling

Equipment : station for draining and filling fuel tanks (see garage equipement catalogue).

Tool	Reference	Designation
Figure : E5AB0FMT	[1617-J]	Set of plugs HDI
Figure : E5AB15YT	[1604-Q]	8 mm diameter union for low pressure take-off

2. Draining the fuel tank via the filler neck

CAUTION : Make sure you will observe the operating instructions of the drain unit.

CAUTION : Use a clean receptacle to collect the fuel.

2.1. Draining the fuel tank

Figure : B1HI00KD

CAUTION : This operation should be carried out with the ignition switched off in order not to interfere with the functioning of the fuel gauge.

Connect plunger pipe (1) to suction pipe (2).