Workshop Manuals Factory service & repair Fiat
Fiat Ducato Mk3 (250) Factory Service Manual (2006-2017)03 · 03 Engine - 3.0 HDi
03 · Engine

1. Application

Make
Fiat
Model
Ducato Mk3 (250) Factory Service Manual
Year
2006–2017
Section
Oxygen sensor: modification › 1. Application
03 Engine - 3.0 HDi1. Application

1. Application

Vehicles all types : Petrol injection engines.

2. Description

Comparison of old oxygen sensor with short harness (A) and new oxygen sensor with lengthened electrical harness (B).

Figure : B1KT001D

Modification of the length of the oxygen sensor electrical harness.
"A" Old oxygen sensor.
"B" New oxygen sensor (Lengthened electrical harness ).

3. Replacement Parts

Only the new parts will be available from the Replacement Parts Division once stocks have been exhausted.

4. Repair

The method for replacing the oxygen sensor is unchanged.

CAUTION : The electrical harness must always stay well out of range of the exhaust line. Secure the excess length of electrical harness with a zip strap.

Left image (C) showing incorrect assembly with excess harness secured near exhaust line (a); Right image (D) showing correct assembly with excess harness secured close to connector (b).

Figure : B1KT002D

"C" Assembly not correct : The excess electrical harness is secured close to the exhaust line (at " a").

"D" Assembly correct : Secure the excess electrical harness close to the connector (at " b").

Parts & tools for this job For 2006 Fiat Ducato

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.