1. Tooling

Make

Fiat

Model

Ducato Mk3 (250) Factory Service Manual

Year

2006–2017

Section

Steering mechanism: removing - refitting › 1. Tooling

05 Steering - 3.0 HDi1. Tooling · page 1 of 3

ESSENTIAL : Observe the safety and cleanliness recommendations.

1. Tooling

Equipment : Lifting tool.

Tool	Reference	Designation
Figure : E5AB0ZPT	[0919]	ball-joint extractor

2. Removing

Disconnect the battery negative terminal.
Untighten the wheel screws (front).
Lift and support the front of the vehicle.
Remove :

• The front wheels
• The protection plates under the engine

Figure : B3EG0JQD

Remove the nut (2) (on each side).
Uncouple the steering ball-joint (1); Using tool [0919] (on each side).

05 Steering & suspension