2. Refitting

Figure : B3EP18ND

Remove bolts (8).

Figure : C5FP0YZD

Detach the assembly of controls under the steering wheel (at "b") By means of a screwdriver.
Disengage all the controls under the steering wheel.
Disconnect the connectors.

Remove the steering wheel controls assembly.

2. Refitting

Replace the steering wheel controls assembly.

Connect the connectors.

Tighten the bolt (8); Tighten to 0,5 ± 0,2 daN.m.

Cut and remove the plastic collar.

Refit :

• The steering column upper cowling ( 6 )
• The (7) bolt; Tighten to 0,2 ± 0,02 daN.m
• The bolts (5); Tighten to 0,2 ± 0,02 daN.m
• The lower trim on the steering column (3)
• The bolts (4); Tighten to 0,2 ± 0,02 daN.m
• The bolts (2); Tighten to 0,2 ± 0,02 daN.m
• The lower panel (1) (see the relevant operation)
• The steering wheel (see the relevant operation)

Reconnect the battery.

Check that the steering wheel electrical controls operate correctly.