Workshop Manuals Factory service & repair Fiat
Fiat Ducato Mk3 (250) Factory Service Manual (2006-2017)06 · 06 Suspension - 3.0 HDi
06 · Steering & suspension

2. Removing (page 3 of 3)

Make
Fiat
Model
Ducato Mk3 (250) Factory Service Manual
Year
2006–2017
Section
Front pivot: removing - refitting
06 Suspension - 3.0 HDi2. Removing · page 3 of 3

Leave the caliper hanging (5).

Unlock the transmission nut.

Image showing a tool [1] securing a drive shaft nut (6) on a wheel hub assembly.

Figure : B3FP7MCD

Immobilise the hub from rotation using tool [1].

Remove :

  • The drive shaft nut (6)
  • The tool [1]
Image showing a steering ball-joint (8) and its retaining nut (7) attached to a suspension component.

Figure : B3FP7MDD

Remove the nut (7).

Uncouple the steering ball-joint (8); Using tool [2].

Diagram of front suspension components including upper link (9), lower link (10), mounting bolts (11, 12, 13, 14, 15).

Figure : B3FP7MED

Parts & tools for this job For 2006 Fiat Ducato

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.