Workshop Manuals Factory service & repair Fiat
01 01 Engine - 2.2 HDi02 02 Brakes - 3.0 HDi03 03 Engine - 3.0 HDi04 04 Gearbox and clutch - 3.0 HDi05 05 Steering - 3.0 HDi06 06 Suspension - 3.0 HDi07 07 Driveshafts and wheels - 3.0 HDi08 08 Air bags09 09 Audio10 10 Body front section11 11 Body rear section12 12 Body shell13 13 Brakes14 14 Wiring diagrams15 15 Wiring diagrams - supplement16 16 Doors17 17 Electrical units18 18 Fascia and panel assembly19 19 Gearbox20 20 Heating, ventilation and air conditioning21 21 Lighting22 22 Power steering23 23 Roof and headliner24 24 Seats25 25 Side structure26 26 Steering27 27 Suspension28 28 Driveshafts and wheels29 29 Wipers and washers
Fiat Ducato Mk3 (250) Factory Service Manual (2006-2017)06 · 06 Suspension - 3.0 HDi
06 · Steering & suspension

2. Removing

Make
Fiat
Model
Ducato Mk3 (250) Factory Service Manual
Year
2006–2017
Section
Front suspension leg: removing - refitting › 2. Removing
06 Suspension - 3.0 HDi2. Removing
Technical drawing of a yellow locking punch with callout [3]

Figure : E5AP2Y5D

ReferenceDesignationReferenceReference
[3]locking punch5709-T.E(-).0619-E

2. Removing

Release the front wheel bolts.

Lift and support the vehicle with front wheels suspended.

Remove the front wheels.

2.1. On the left-hand side

Photograph of a blue lower lining in the wheel arch area with callout 1

Figure : C5FP0YPD

Remove the lower lining (1) (see the relevant operation).

Parts & tools for this job For 2006 Fiat Ducato

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.