10 · Body & interior

7. Adjustment (page 2 of 2)

Make: Fiat
Model: Ducato Mk3 (250) Factory Service Manual
Year: 2006–2017
Section: Front bulkhead crossmember assembly: replacement

10 Body front section7. Adjustment · page 2 of 2

7. Adjustment (page 2 of 2) – diagram from the 10 Body front section chapter of the Fiat Ducato Mk3 (250) Factory Service Manual (2006-2017) factory manual.

Diagram showing the front bulkhead crossmember assembly with spot welds indicated by red dots and callout 'f' pointing to the weld locations.

Figure : C4CP20UD

Figure 11.
Weld with MIG or MAG spot welds.
Grind the spot welds.
Repeat the operation on the opposite side (following "f").

Diagram showing the front bulkhead crossmember assembly from a different angle, with spot welds indicated by red dots and callout 'g' pointing to the weld locations.

‹ Prev 7. Adjustment Next › 9. Sealing

Parts & tools for this job For 2006 Fiat Ducato

TOOLTrim removal tool kitSearch: trim removal tool kit
PARTTouch-up paintSearch: Fiat touch up paint
PARTPanel clip assortmentSearch: Fiat panel clips assortment

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.