9. Sealing
- Make
- Fiat
- Model
- Ducato Mk3 (250) Factory Service Manual
- Year
- 2006–2017
- Section
- Front bulkhead crossmember assembly: replacement › 9. Sealing
10 Body front section9. Sealing · page 1 of 2
Figure : C4AP1SED
Figure 12.
Weld with MIG or MAG spot welds.
Grind the spot welds.
Repeat the operation on the opposite side (following "g").
9. Sealing
Figure : C4CP20VD
Figure 13.
Apply a phosphate-print layer on the zone laid bare.
Apply a sealing mastic of type " A4" (see the relevant operation).
Repeat the operation on the opposite side (following "h").
Parts & tools for this job For 2006 Fiat Ducato
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Fiat touch up paint
- PARTPanel clip assortmentSearch: Fiat panel clips assortment
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.