10 · Body & interior

9. Sealing (page 2 of 2)

Make: Fiat
Model: Ducato Mk3 (250) Factory Service Manual
Year: 2006–2017
Section: Front bulkhead crossmember assembly: replacement

10 Body front section9. Sealing · page 2 of 2

Diagram showing the application of sealing mastic (indicated by red dotted lines and callout j) along the edge of the blue front bulkhead crossmember where it joins the vehicle body structure.

Figure : C4CP20WD

Figure 14.
Apply a phosphate-print layer on the zone laid bare.
Apply a sealing mastic of type " A1" (see the relevant operation).
Repeat the operation on the opposite side (following "j").

Diagram showing the full width of the blue front bulkhead crossmember with red dotted lines indicating the areas for applying sealing mastic along the upper edge where it meets the vehicle body.

‹ Prev 9. Sealing Next › 10. Protection

Parts & tools for this job For 2006 Fiat Ducato

TOOLTrim removal tool kitSearch: trim removal tool kit
PARTTouch-up paintSearch: Fiat touch up paint
PARTPanel clip assortmentSearch: Fiat panel clips assortment

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.