3. Refitting
- Make
- Fiat
- Model
- Ducato Mk3 (250) Factory Service Manual
- Year
- 2006–2017
- Section
- Windscreen: removing - refitting › 3. Refitting
10 Body front section3. Refitting
![Front view of a white van showing the windscreen with four yellow suction cup tools attached to the glass. Callout number 4 points to the windscreen, and [KIT1-VENT] points to the suction tools.](/fiat/ducato-2006-2017/assets/page_1061_fig01.png)
Figure : C5CG1E9D
N.B. : For the following operations, two operators are necessary.
Remove the windscreen (4); Using the tools [KIT1-VENT].
3. Refitting
ESSENTIAL : Fit a new rain sensor.
Refit the shims (1) (New).
3.1. Preparing the flange and windscreen
Fit the electric knife [FEIN-400E] with the blade N° 146.
Level off the beads of adhesive on the windscreen and the flange.
Parts & tools for this job For 2006 Fiat Ducato
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Fiat touch up paint
- PARTPanel clip assortmentSearch: Fiat panel clips assortment
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.