11 · Body & interior

5. Cutting out (page 2 of 5)

Make: Fiat
Model: Ducato Mk3 (250) Factory Service Manual
Year: 2006–2017
Section: Rear pillar assembly: replacement

11 Body rear section5. Cutting out · page 2 of 5

5. Cutting out (page 2 of 5) – diagram from the 11 Body rear section chapter of the Fiat Ducato Mk3 (250) Factory Service Manual (2006-2017) factory manual.

Diagram showing the upper section of the rear pillar assembly with spot welds marked by red star icons along the joint between the blue pillar and the grey body panel.

Figure : C4CP1ZFD

Figure 5.

Cut out the spot welds.

Diagram showing the lower section of the rear pillar assembly with spot welds marked by red star icons near the wheel arch and floor panel junction.

Figure : C4CP1ZGD

Figure 6.

‹ Prev 5. Cutting out Next ›

Parts & tools for this job For 2006 Fiat Ducato

TOOLTrim removal tool kitSearch: trim removal tool kit
PARTTouch-up paintSearch: Fiat touch up paint
PARTPanel clip assortmentSearch: Fiat panel clips assortment

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.