4. Tooling

The symbol "a" is obtained by stamping the letter "X" placed horizontally, with a second stamping of the letter "I" superimposed.

The cold stamping of a serial number must be carried out by an authorised repairer of the manufacturer's marque.

4. Tooling

Kit of 7 mm stamping punches.

Mechanic's hammer.

Figure : E5AB16TD

Coachbuilder's dolly.

Use the dolly to prevent any distortion of the panel during stamping.

Position the dolly on the opposite face of the cold stamping area.

5. Preliminary operations

CAUTION : To prevent any corrosion, the cold stamping must be carried out before painting.

Remove the components necessary for positioning the coachbuilder's dolly and the stamping punches.

6. Cold stamped inscription

N.B. : 2 operators are required for this operation.

7. Cold stamping of the serial number (VIN)