Ducato Mk3 (250) Factory Service Manual (2006-2017): 12 Body shell

Also sold as the Peugeot Boxer (2006–2017) and Citroën Jumper (2006–2017). This manual applies to all of them.

Also for this vehicle: Ducato Factory Service Manual (2002-2006).

Choose Sections to see everything in a chapter, or a chapter title to start at its first page.

1. 0101 Engine - 2.2 HDi01 Engine - 2.2 HDi: Sections
2. 0202 Brakes - 3.0 HDi02 Brakes - 3.0 HDi: Sections
3. 0303 Engine - 3.0 HDi03 Engine - 3.0 HDi: Sections
4. 0404 Gearbox and clutch - 3.0 HDi04 Gearbox and clutch - 3.0 HDi: Sections
5. 0505 Steering - 3.0 HDi05 Steering - 3.0 HDi: Sections
6. 0606 Suspension - 3.0 HDi06 Suspension - 3.0 HDi: Sections
7. 0707 Driveshafts and wheels - 3.0 HDi07 Driveshafts and wheels - 3.0 HDi: Sections
8. 0808 Air bags08 Air bags: Sections
9. 0909 Audio09 Audio: Sections
10. 1010 Body front section10 Body front section: Sections
11. 1111 Body rear section11 Body rear section: Sections
12. 1212 Body shell12 Body shell: Sections
    • Anti-chip compound: identification › Anti-chip compound: identification23
    • Cold stamping of the serial number: location, vin13 pages

      • 1. Characteristics of the serial number
      • 3. Location of the identification number (V.I.N) cold stamping zones
      • 3.2. Front right suspension mounting zone location (Wing side)
      • 3.3. Front right suspension mounting zone location (Engine side) - Rear screen lower crossmember
      • 3.4. Front right wheel arch upper section zone location
      • 3.5. Bulkhead flange right-hand section zone location
      • 3.6. Bulkhead flange right-hand central section zone location
      • 3.7. Rear right wheel arch zone location
      • 3.8. Front right floor zone location
      • 3.9. Front right seat crossmember zone location
      • 3.11. Front right pillar
      • 3.12. Lower windscreen aperture2
    • Serial number: cold stamped inscription4 pages

      • 1. Legislation
      • 3.3. Creating the symbol
      • 4. Tooling
      • 8. Protection
    • Tipper truck hydraulic control: tightening torques3 pages

      • 1. Hydraulic unit
      • 3. Circuit cut-off2
    • Tipper truck hydraulic ram: removing - refitting6 pages

      • 1. Checking the level and bleeding the hydraulic circuit
      • 2.2. Refitting
      • 3.1. Removing
      • 3.2. Refitting
      • 4.1. Removing
      • 4.2. Refitting
    • Operations on tipper truck: safety recommendations › Operations on tipper truck: safety recommendations2
13. 1313 Brakes13 Brakes: Sections
14. 1414 Wiring diagrams14 Wiring diagrams: Sections
15. 1515 Wiring diagrams - supplement15 Wiring diagrams - supplement: Sections
16. 1616 Doors16 Doors: Sections
17. 1717 Electrical units17 Electrical units: Sections
18. 1818 Fascia and panel assembly18 Fascia and panel assembly: Sections
19. 1919 Gearbox19 Gearbox: Sections
20. 2020 Heating, ventilation and air conditioning20 Heating, ventilation and air conditioning: Sections
21. 2121 Lighting21 Lighting: Sections
22. 2222 Power steering22 Power steering: Sections
23. 2323 Roof and headliner23 Roof and headliner: Sections
24. 2424 Seats24 Seats: Sections
25. 2525 Side structure25 Side structure: Sections
26. 2626 Steering26 Steering: Sections
27. 2727 Suspension27 Suspension: Sections
28. 2828 Driveshafts and wheels28 Driveshafts and wheels: Sections
29. 2929 Wipers and washers29 Wipers and washers: Sections