1. Tooling

ESSENTIAL : Observe the safety and cleanliness recommendations.

1. Tooling

A bleed unit approved by the manufacturer.

A diagnostic tool.

2. Drain - refill

Figure : B3FP7N8D

Disconnect the connector (at "a").

Uncouple the pipe (1).

Remove :

• The brake fluid reservoir cap
• The brake fluid reservoir filter

Drain the brake fluid reservoir as completely as possible; Using a syringe.

Withdraw the reservoir from its two outlets by pulling upwards.

Empty the brake fluid reservoir.

Clean the brake fluid reservoir.

Refit the brake fluid reservoir.

Couple the pipe (1).

N.B. : Fit a new clic clip.