3. Refitting

CAUTION : Plug the inlets and outlets of the hydraulic valve block (4) to prevent any foreign bodies getting in.

3. Refitting

CAUTION : Remove the plugs from the apertures of the hydraulic valve block before fitting the brake pipes.

N.B. : The hydraulic valve block (4) is delivered full of brake fluid.

Figure : B3FP7MZD

Check that the rubber pad (5) is present (according to equipment).

Refit the hydraulic valve block (4) onto its support.

Engage the rubber pad (5) in its support (according to equipment).

CAUTION : Adhere to the tightening torques.

Tighten the nuts (3).

Recouple unions (2) and (1).

Connect the connector (at "a").

Refit :

• The rubber protection (according to equipment)
• The front LH headlamp

Remove the pedal push.

CAUTION : Perform the operations to be carried out following reconnection of the battery.

Reconnect the battery.

Bleed the brake system.