Checking and adjusting values : Braking system.
- Make
- Fiat
- Model
- Ducato Mk3 (250) Factory Service Manual
- Year
- 2006–2017
- Section
- Vacuum pump: check › Checking and adjusting values : Braking system.
13 BrakesChecking and adjusting values : Braking system.
Connect tool [1604-D] to the vacuum pipe (1).
Connect tool [1602-A] to tool [0817].
Start the engine to run at idle.
Read the vacuum value.
Checking and adjusting values : Braking system.
If the value is outside the tolerance, check :
- The vacuum pump directly
- The sealing of the vacuum pipe (1)
Rectify (if necessary).
Remove the tools [1602-A], [0817], [1604-D], [1604-E].
Couple up :
- The vacuum pipe (1) on the vacuum pump (2)
- The vacuum pipe (1) on the braking amplifier
Parts & tools for this job For 2006 Fiat Ducato
- PARTBrake padsSearch: Fiat Ducato 2006 brake pads
- TOOLBrake bleeder kitSearch: one man brake bleeder kit
- FLUIDBrake fluidSearch: brake fluid
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.