19 · Transmission

3. Refitting

Make: Fiat
Model: Ducato Mk3 (250) Factory Service Manual
Year: 2006–2017
Section: Drive shaft seals: removing - refitting › 3. Refitting

‹ Prev 2.2. On the right-hand side Next › 3.2. On the right-hand side

19 Gearbox3. Refitting

Close-up view of the differential housing area showing the right-hand driveshaft seal (5) and the turbocharger air outlet rigid pipe (4).

Figure : B2CP49WD

Remove :

The right-hand driveshaft seal (5)
The turbocharger air outlet rigid pipe (4)

N.B. : Push the right-hand seal towards the inside of the differential housing, using a pin punch, while supporting the opposite side of the seal using a screwdriver.

3. Refitting

CAUTION : Clean the gasket faces with an approved descaling product. Do not use abrasives or sharp tools on the joint faces. The seal faces should not show any traces of impacts or scratches.

3.1. On the left-hand side

Oil the LH driveshaft seal.

‹ Prev 2.2. On the right-hand side Next › 3.2. On the right-hand side

Parts & tools for this job For 2006 Fiat Ducato

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.