9. Adjustment

Prepare the mating edges and protect them using a weldable primer (Index: "C7").

N.B. : Apply the weld-through primer on the internal faces of the panels to be welded.

9. Adjustment

Position :

• Cab door frame
• The components for adjusting

Check the fits and clearances.
Adjust the cuts (if necessary).
Holds the part in position.

10. Welding

CAUTION : The number of spot welds necessary for the assembly of a new part must be identical to the number of spot welds fixing the original part.

Figure : C4CH3T8D

Weld with MAG beads (at "e").
Grind the MAG weld beads.
Weld with MAG plug welds (at "g").
Grind the MAG plug welds.
Weld with electric spot welds (at "f").