25 · General

9. Adjustment (page 2 of 3)

Make: Fiat
Model: Ducato Mk3 (250) Factory Service Manual
Year: 2006–2017
Section: Part cab door frame: replacement

25 Side structure9. Adjustment · page 2 of 3

9. Adjustment (page 2 of 3) – diagram from the 25 Side structure chapter of the Fiat Ducato Mk3 (250) Factory Service Manual (2006-2017) factory manual.

View of the upper corner of a cab door frame showing a series of spot welds along the vertical edge where the blue painted section meets the unpainted inner structure.

Figure : C4AP1RAD

Weld with electric spot welds.

View of the lower section of a cab door frame showing spot welds indicated by callout 'h' along the horizontal seam and a MAG plug weld indicated by callout 'j' at the corner joint.

Figure : C4CH3TAD

Weld with electric spot welds (at "h").

MAG plug weld (at "j").

‹ Prev 9. Adjustment Next ›

Parts & tools for this job For 2006 Fiat Ducato

TOOLTrim removal tool kitSearch: trim removal tool kit
PARTTouch-up paintSearch: Fiat touch up paint
PARTPanel clip assortmentSearch: Fiat panel clips assortment

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.