1. Tooling (page 2 of 2)
- Make
- Fiat
- Model
- Ducato Mk3 (250) Factory Service Manual
- Year
- 2006–2017
- Section
- Rear quarter window: removing - refitting
25 Side structure1. Tooling · page 2 of 2
![Diagram showing the rear quarter window with callouts [1354-E] pointing to a wire loop and [1354-C] pointing to an awl tool inserted into the window seal.](/fiat/ducato-2006-2017/assets/page_1245_fig01.jpg)
Figure : C5CG0K2D
Pass the awl [1354-C] through the bead of sealing adhesive, from the inside towards the outside.
Attach the cutting wire [1354-E] to the awl [1354-C].
Pass the cutting wire [1354-E] inside the vehicle.
Leave a sufficient length to permit fixing of the handles [1354-D].
Install the handles [1354-D] at each end of the cutting wire [1354-E].
Parts & tools for this job For 2006 Fiat Ducato
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Fiat touch up paint
- PARTPanel clip assortmentSearch: Fiat panel clips assortment
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.