3. Refitting

Figure : B3BP1CED

Attach the steering rod to the hub carrier.

Remove the front anti-roll bar (10) from the left-hand side with a downward rotation (following the arrow ).

3. Refitting

N.B. : Always fit new Nylstop nuts.

Refit (on each side) :

• The front anti-roll bar (10)
• The bolts (9); Tighten to 5 ± 1,3 daN.m
• The connecting rod (8)
• The silentblock (7)
• The washer (6)
• The nuts (5), (3)

Position the hub carrier lower ball joint.

Refit the bolts (4); Tighten to 11,5 ± 0,4 daN.m.

Couple up the steering ball-joint (2).

Refit the nut (1); Tighten to 8 ± 0,7 daN.m.

Fit the wheel.

Return the vehicle to its wheels.

Tighten (on each side) :

• The nut (3) to 5,6 ± 0,5 daN.m
• The nut (5) to 5,6 ± 0,5 daN.m

Tighten the wheel bolts [i icon].

Reconnect the battery.