1. Removing

1. Removing

Raise and support the vehicle, with the rear wheels hanging free.

Figure : B3BP1CJD

Remove bolts (1).

N.B. : To facilitate screw ( 1) removal or refitting, the strain on the axle should be relieved by means of a jack or a hydraulic post type hoist.

Remove :

• The (2) bolt
• The damper (3)

2. Refitting

Refit :

• The damper (3)
• The bolts (2), (1) (without tightening)

Return the vehicle to its wheels.

Place the vehicle at its reference ride height (see the relevant operation).