2. Removing (page 6 of 6)
- Make
- Fiat
- Model
- Ducato Mk3 (250) Factory Service Manual
- Year
- 2006–2017
- Section
- Rear suspension: removing - refitting
27 Suspension2. Removing · page 6 of 6
![Diagram showing the rear axle supported by a lifting tool [2] and a jack [1], with callouts for suspension blade screws (6), fixing bolts (7, 8), and damper fixings. Two circular insets provide close-up views of the connection points.](/fiat/ducato-2006-2017/assets/page_3073_fig01.png)
Figure : C4BP1QXD
Position the tool [2] under the rear suspension; Using tool [1]. Keep the rear axle in position using the lifting tool [2]. Slacken off suspension blade screws (6).
Remove :
- The rear suspension fixing bolts (7), (8)
- The upper fixing (5) of the dampers (on each side)
Parts & tools for this job For 2006 Fiat Ducato
- TOOLCoil spring compressorSearch: coil spring compressor
- TOOLBall joint separatorSearch: ball joint separator
- PARTRear shock absorbersSearch: Fiat Ducato 2006 rear shock absorbers
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.