3. Refitting (page 2 of 2)

Reconnect the wheel sensor connector " b " (on each side).
Clip the wheel sensor harness on the body (on each side).
Return the spare wheel to its place.
Refit the rear wheels.

Return the vehicle to its wheels.

Before carrying out the final tightening of fixings, the vehicle MUST be placed at the load setting height (see the relevan operation).
Tighten :

• The bolts (5), (6), (7) to 14,5 ± 1,2 daN.m
• The bolts (8) to 18,5 ± 2,9 daN.m

Tighten the wheel bolts.

Reconnect the battery negative terminal.