1. Removing

1. Removing

Remove the sensor trim.

Figure : C5DP06VD

Disconnect the connector "a".

Unclip the spring ( 2).

Extract the rain sensor ( 1) from its base by hand (perpendicular to the windscreen).

2. Refitting

ESSENTIAL : Fit a new rain sensor.

N.B. : The cleanliness of the rain sensor and of the windscreen are essential for the correct operation of the system.

Clean the windscreen and the inside of the base of all dirt, bonding residue and other particles; using a non-fluffy paper towel and glass detergent.

CAUTION : Chemical detergents are not authorised.

Remove the protection cover.

CAUTION : Do not touch the contact surface with the skin or with any object.