Bonnet lid opening cable - r r

Operation 7025A28 · LOCATION OF BONNET WIND NOISE

Removing

- 7025A34 bonnet lid lock (one) - r+r or repair

- 5530B10 battery - r+r

- 5530B52 Battery DRIP TRAY/SUPPORT - R.R.

Remove the tray under the battery.

1. Working in the car interior, remove the cover from the side indicated by the arrow.

2. Disconnect the control cable (2a) from the lever (2b) and retainer (2c).

1. Working in the engine compartment, disconnect the filter unit (1a) from the retainers (1b) and (1c), then move it.

2. Disconnect the control cable retaining clips.

3. Withdraw the control cable from the engine compartment.

Refitting

Check that the control cable is undamaged.

Refit the control cable, inserting it from the engine compartment side.

Secure the control cable with the appropriate clips.

Fit the filter unit and connect it to the retainers.

Connect the control cable to the lever and retainer.

Fit the cover.

Refit the tray under the battery.

- 5530B52 Battery DRIP TRAY/SUPPORT - R.R.

- 5530B10 battery - r+r

- 7025A34 bonnet lid lock (one) - r+r or repair