Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Multipla Factory Service Manual (1998-2010)17 · Body fittings
17 · Body & interior

Boot lid opening lever - r+r

Make
Fiat
Model
Multipla Factory Service Manual
Year
1998–2010
Section
Compartment lids › Boot lid opening lever - r+r
Body fittingsBoot lid opening lever - r+r

Boot lid opening lever - r+r

Operation 7025A24 · LOCATION OF BONNET WIND NOISE

Removing

- 7040A96 facia glove compartment flap (1) lh or rh - r r (left side)

- 7040A37 fuse box cover - r r

- 5580C26 LOCK BARREL KEY/SWITCH for deactivating passenger 'AIR BAG - R.R.

- 7040A44 facia lh side cover - r r

1. Disconnect the cover, working from the side indicated by the arrow.

2. Disconnect the cable (2a) from the lever (2b) and retainer (2c).

1. Release the retainers (1a) and remove the lever (1b).

Refitting

Check that the lever is undamaged.

Fit the lever and the retainers.

Connect the cable to the lever and retainer.

Fit the cover.

Check that the bonnet opening control works.

- 7040A44 facia lh side cover - r r

- 5580C26 LOCK BARREL KEY/SWITCH for deactivating passenger 'AIR BAG - R.R.

- 7040A37 fuse box cover - r r

- 7040A96 facia glove compartment flap (1) lh or rh - r r (left side)

Parts & tools for this job For 1998 Fiat Multipla

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.