HEADLAMP BEAM

Operation 7210A20 · STRUCTURAL ELEMENTS (FRONT PART)

from 06/04

Removing

• Check that the components connected are not distorted by checking the bodyshell alignment measurements using suitable equipment (gauges, templates or jigs).
• Op. 7210A15 R.R. HEADLAMP HOUSING/FRONT WING CROSSMEMBER

• Undo the bolts fixing the headlight housing to the bodyshell.
• Remove the headlight housing.

Refitting

• Position the replacement part correctly on the vehicle.

• Screw in the bolts fixing the headlight housing to the bodyshell without tightening them.

• Place the bonnet in a closed position.

• Check/adjust the alignment and surrounding gaps until perfect, then tighten the fixing bolts.

• Paint the wing crossmember following the recommended cycle.