Thermostat- r + r

Operation 1088C40 · Water pump and thermostat

1.9 JTD 8V

Removing

- 1048A10 air cleaner filtering element - replace

Place a container under the vehicle to collect the engine coolant.

Undo the plug in the lower part of the engine radiator and drain the coolant system.

1. Disconnect the electrical connection from the engine temperature sensor.

2. Disconnect the coolant hoses from the thermostat.

3. Undo the bolts.

4. Remove the thermostat from the cylinder head.

Refitting

Fit the thermostat in its seat on the cylinder head.

Tighten the fixing bolts to torque.

Connect the coolant hoses to the thermostat.

Connect the electrical connection to the engine temperature sensor.

- 1048A10 air cleaner filtering element - replace

- 1088A10 Engine COOLANT - Check density' and top up level, if necessary