Gpl filler fitting r r

Operation 1043A30 · Gpl tank

1.6 16v · GPOWER

Removing

Drain the section of the pipe from the recharging filler to the tank, following the procedure and the instructions given - 1043A02 lpg system lines pipe draining operations.

Place the car on a lift.

- 4450B08 right rear wheel r r.

- 7055B43 REAR WHEEL ARCH liner (one), left or right - R.R..

1. Using the tool (1a) inserted in the special openings, undo the cup (1b) from the LPG filler.

1. Undo the connector (1a) for the LPG filler (1b), then undo the nuts (1c) and remove the LPG filler.

Refitting

Position the LPG filler and secure it using the nuts.

Connect the LPG pipe to the filler and tighten it to torque.

Using the special tool, tighten the LPG filler cup.

- 7055B43 REAR WHEEL ARCH liner (one), left or right - R.R..

- 4450B08 right rear wheel r r.

- 1043A04 gpl system and pipes check for leaks.