LPG level potentiometer operation check
- Make
- Fiat
- Model
- Multipla Factory Service Manual
- Year
- 1998–2010
- Section
- Lgp tank and pipes › LPG level potentiometer operation check
‹ Prev Check operation of LPG level sensorNext › Check on operation of LPG cut out solenoid valve on pressure regulator
EngineLPG level potentiometer operation check
LPG level potentiometer operation check
The operating check is carried out on two positions of the LPG level potentiometer; check that it corresponds to the specified values.
| Name | Connector | |
|---|---|---|
| GPL level sensor | K33 |
With the float at the minimum LPG level, the value measured between pins 1 and 2 must be 48200 Ohm ± 20%.
With the float at the maximum LPG level, the value measured between pins 1 and 2 must be 48700 Ohm ± 20%.
‹ Prev Check operation of LPG level sensorNext › Check on operation of LPG cut out solenoid valve on pressure regulator
Parts & tools for this job For 1998 Fiat Multipla
- PARTEngine gasket setSearch: Fiat Multipla 1998 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.