Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Multipla Factory Service Manual (1998-2010)22 · Fault diagnosis
22 · Diagnostics

Clutch pedal hardening

Make
Fiat
Model
Multipla Factory Service Manual
Year
1998–2010
Section
Clutch › Clutch pedal hardening
Fault diagnosisClutch pedal hardening

CLUTCH PEDAL HARDENING

When the clutch pedal is pressed, the resistance is excessive,

Since this symptom is "subjective", make sure that there really is an effective hardening compared with the previous condition which was considered "normal"

Results of the tests
1CLUTCH PEDAL CHECKAll OKProblems metOperation
Check the clutch pedal travel is smooth (no binding)Continue to Step 2Pedal travel not correctRestore the operation of the clutch pedal Op. 1820A14
2CHECK CLUTCH CABLEAll OKProblems metOperation
Check the condition of the clutch cableContinue to Step 3Cable defective or incorrectly fastenedRestore the cable fastenings or replace Op. 1820A20
3CHECK PEDAL UNITAll OKProblems metOperation

Check:

  • condition of pedal unit joint bushes
  • pedal correctly fastened
Continue to Step 4Bushes defective or hardenedRepair the pedal unit Op. 3330B14
Fastenings not correctRestore fastenings Op. 3330B14
4CHECK SPLINED HUBAll OKProblems metOperation
Check for insufficient grease on the clutch disc hub bushes and the gearbox main shaftContinue to Step 5Gearbox main shaft hub faultyReplace the gearbox main shaft (see Assembly 2110B)
Clutch plate hub bushes faulty

Restore the correct lubrication for the bushes

If necessary, replace the clutch plate Op. 1810A20

5CLUTCH PLATE CHECKAll OKProblems metOperation

Check:

  • that the clutch plate is not distorted
  • that there is no damage to the pressure plate diaphragm spring
Continue to Step 6Clutch plate or pressure plate faultyReplace the clutch plate Op. 1810A20
6CHECKING CORRECT OPERATIONAll OKProblems metOperation
Check that the fault is no longer presentEnd of diagnosisFault persistsSearch for the fault starting from another symptom'

Parts & tools for this job For 1998 Fiat Multipla

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.