Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Multipla Factory Service Manual (1998-2010)22 · Fault diagnosis
22 · Diagnostics

Clutch slipping

Make
Fiat
Model
Multipla Factory Service Manual
Year
1998–2010
Section
Clutch › Clutch slipping
Fault diagnosisClutch slipping

CLUTCH SLIPPING

During acceleration, a consistent increase in the engine speed is noticed without a corresponding increase in the speed of the vehicle

This symptom can be easily checked by pressing the clutch pedal and engaging 4th speed; when accelerating and gradually releasing the clutch pedal, the vehicle does not move and the engine does not cut out

Results of the tests
1CLUTCH PEDAL CHECKAll OKProblems metOperation

Check clutch pedal action is smooth

Check the pedal travel is correctly adjusted at both ends.

Continue to Step 2Pedal travel not correctRestore the operation of the clutch pedal Op. 1820A14
2CLUTCH PLATE CHECKAll OKProblems metOperation

Check:

  • clutch plate wear
  • clutch plate fouling (oil or grease)
  • that the clutch plate is not distorted
  • that there is no damage to the pressure plate diaphragm spring
Continue to Step 3Clutch plate or pressure plate faultyReplace the clutch plate Op. 1810A20
Presence of oil or greaseAlso replace the gearbox input oil seal Op. 2110C20
3CHECK SPLINED HUBAll OKProblems metOperation
Check for excess grease on the clutch plate hub bushes and the gearbox main shaftContinue to Step 4Gearbox main shaft hub faultyReplace the gearbox main shaft (see Assembly 2110B)
Clutch plate hub bushes faulty

Restore the correct lubrication for the bushes

If necessary, replace the clutch plate Op. 1810A20

4FLYWHEEL CHECKAll OKProblems metOperation
Check the condition of the flywheel (in particular, the condition of the surface and that there are no signs of overheating, irregular wear, incisions or the removal of material)Continue to Step 5Flywheel damagedReplace the flywheel Op. 1024B22
5CHECKING CORRECT OPERATIONAll OKProblems metOperation
Check that the fault is no longer presentEnd of diagnosisFault persistsSearch for the fault starting from another symptom'

Parts & tools for this job For 1998 Fiat Multipla

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.