Workshop Manuals Factory service & repair

Fiat Multipla Factory Service Manual (1998-2010)22 · Fault diagnosis

22 · Diagnostics

Clutch noisy

Make: Fiat
Model: Multipla Factory Service Manual
Year: 1998–2010
Section: Noisy / vibrations › Clutch noisy

‹ Prev Noise gearbox / round bends Next › Brakes noisy

Fault diagnosisClutch noisy

CLUTCH NOISY

When the clutch pedal is operated there is a noise (creaking)

0	PRELIMINARY CHECKS	All OK	Problems met	Operation
		Results of the tests
	With the engine idling and the gear lever in neutral, press the clutch pedal. Then, with the engine running and the handbrake applied, engage first gear and release the clutch	The noise does not disappear: Continue to Step 1	The noise disappears with the clutch pressed	See table S01
		The noise does not disappear: Continue to Step 1	The noise disappears with the gear engaged	See table S40
1	CLUTCH PEDAL CHECK	All OK	Problems met	Operation
	Check the clutch pedal travel Also check for excessive clearance of the pedal pin	Continue to Step 2	Pedal travel not correct	Restore the operation of the clutch pedal Op. 1820A14
2	CLUTCH CHECK	All OK	Problems met	Operation
	Check: clutch disc wear or "vitrification" that there is no damaged to the flywheel flexible coupling springs	Continue to Step 3	Clutch plate or pressure plate faulty	Replace the clutch plate Op. 1810A20
			Presence of oil or grease	Also replace the gearbox input oil seal Op. 2110C22
			Flywheel damaged	Replace the flywheel Op. 1024B22
3	CHECKING CORRECT OPERATION	All OK	Problems met	Operation
	Check that the fault is no longer present	End of diagnosis	Fault persists	Search for the fault starting from another symptom'

‹ Prev Noise gearbox / round bends Next › Brakes noisy

Parts & tools for this job For 1998 Fiat Multipla

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.