Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Multipla Factory Service Manual (1998-2010)22 · Fault diagnosis
22 · Diagnostics

Fuel odours from the boot

Make
Fiat
Model
Multipla Factory Service Manual
Year
1998–2010
Section
Odours › Fuel odours from the boot
Fault diagnosisFuel odours from the boot

FUEL ODOURS FROM THE BOOT

With the car moving, there is a smell of fuel, especially after refuelling, coming from the rear.

Results of the tests
0PRELIMINARY CHECKSAll OKProblems metOperation
First check for leaks from or damage to the fuel tank.Continue to Step 1Leaks from the fuel tankRepair or replace the fuel tank Op. 1040A14
1CHECK AIR VENTSAll OKProblems metOperation

Check the rear air outlet fittings

In particular, ascertain:

  • fin orientation (they must open outwards)
  • correct assembly
Continue to Step 2Faulty assemblyReposition the vents correctly Op. 5010C60
2CHECK FUEL TANK FILLERAll OKProblems metOperation

Check the tank filler fitting, in particular:

  • seal of filler housing on wing
  • condition of filler
  • cap seal
Continue to Step 3Faulty filler capRepair filler Op. 1040A30
Faulty filler capRepair cap Op. 1040A40
3CHECK PUMP COVERAll OKProblems metOperation
Check the pump cover/fuel gauge sender unit seal for leaksContinue to Step 4Seal worn, cover damagedReplace the seal or cover Op. 1040A70
4VAPOUR RECOVERY SYSTEM CHECKAll OKProblems metOperation
1.6 16vCheck the vapour recovery system for leaksContinue to Step 5Leaks from vapour recovery systemTighten connections, clips. If necessary replace the components concerned (see Assembly 1080E)
1.9 JTD 8VContinue to Step 5
5UNDERBODY CHECKAll OKProblems metOperation
Check the underbody plugs are fitted at the rear of the carContinue to Step 6Underbody plugs missingRefit the missing plugs
6CHECKING CORRECT OPERATIONAll OKProblems metOperation
Check that the fault is no longer presentEnd of diagnosisFault persistsSearch for the fault starting from another symptom'

Parts & tools for this job For 1998 Fiat Multipla

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.